Search Results for "rs232"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

...This software is still in a testing (beta) phase but has been tested successfully with the following security control panels made by Microtech / Honeywell Security: - Galaxy 18 (Dutch firmware v1.25) with external RS232 box - Galaxy 60 (Dutch firmware v1.07) with external RS232 box - Galaxy G3-520 (Dutch firmware v5.50) (internal RS232)

PiXtend® multiplies the capabilities of the Raspberry Pi and forms the ideal basis for challenging projects. The PiXtend Platform provides numerous digital and analog inputs & outputs as well as a variety of serial interfaces like RS232, RS485 and CAN. In this repository you can find the Linux C library called "pxdev" that can be used to develop your own Linux applications for the PiXtend system (V1 & V2). Sample programs for every PiXtend version are also included in this repository. The build file compiles them all - the library itself and the sample programs. ...

The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface for temperature sensors. * Soil Moisure Sensors are responsible for sensing if the soil of irrigated flowers are wet or not. These sensors are attached to the Sensor Controller Module via slow speed I2C bus. ...

This is an inteface for the data acquisition cable for the UNI-T (Uni-trend) UT61D multimeter. It supports both USB (using libusb) and RS232 cables. The interface consists of a single C header file.

...The implementation is based around an AVR microcontroller. The interface is controlled via a serial interface. The aim is to create an android app to control the antenna via a rs232 ttl to bluetooth converter.

LeanLoader is a modularized boot loader for tiny embedded systems including 8-Bit AVR or low end ARM7TDMI MCUs. Among others, it supports TFTP over Ethernet as well as XMODEM over RS232.

Operating System for embeded device based on small µController (Microchip, Atmel, …) This OS enable the device to be connected and controlled by a PC trought RS232 protocol (COM, TTY or USB port) with standard Terminal or Shell integration.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

...Provides detailed data views, logging to database, trip data estimation, trainer with Top 10 laps, graphical speedometer. Supports km/h and mph units. The wheel sensor is simply connected over RS232 or even IrDA.

This is an application proxy that let communicate with pipes/serial port(rs232 rs485)/tcp/ip and potencially all devices in a host computer via tpc/ip sockets. It sopport multicast and communication issolation.

It is an opensource programer MCU51 chips family (i.e. 8051, 8052...) and i2c eeproms (i.e. 24c01...), programer accepts input file in Intel Hex file format and with pc comunicate via rs232.

RS-232 data acquisition & control. Intuitive cmd-line Linux serial communications designed for RS232 devices & modules: Temperature, humidity, A/D, D/A, digital indicators, multimeters, scales, etc. Suitable for use in scripts, R.A.D., or cmdln diags.

Monitoring/controlling tools and libraries for mCubed's T-Balancer family of devices. Connection is done via rs232 conversor port.

Library for serial RS232 communication with the LI-COR(R) LI-7000 gas analyser

A graphical Data Acquisition system for measuring data from different sources via CAMAC, GPIB, RS232, etc.

PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device

Genpower is a daemon that monitors the state of an uninterrupted power supply device (UPS) through an RS232 serial interface, and takes action according to the state of the UPS. A variety of device and cables are supported.

LUnix (little UNIX) is an operating system for the Commodore64 - a famous home computer back in the 80s. It supports TCP/IP networking (SLIP or PPP using a RS232 interface). LUnix aims to look and feel like UNIX.

Windows program to control your Sony DVP-CX777ES 400-disc DVD player via its RS232 port connected to the serial port of your computer. Includes documentation and all source.

Zmeter is an RS232 serial interface program for the RadioShack 22812 (46 range) Digital Multi Meter (DMM). Zmeter captures the DMM display and outputs it in ASCII text to stdout.

...One program for webcam controlling inline with the orginal idé. And different help classes if you would like to do something yourself. Also a general package of classes to communicate with the RS232 port.

PELCO-PTZ provides a command line RS232 driver for controlling Pelco Inc., surveillance cameras that have RS422/485 inputs. This driver implements the Pelco 'P' protocol used to control such devices. The command line interfaces supports all aspects of

Software for controlling the 1623PC PC to IR Linc, a learning infrared remote control device with an RS232 interface.

Ssnooper is a program to created to aid in the debugging of serial line (RS232) connections. With ssnooper, a computer with two free serial ports can be connected between two serial devices to intercept and log all communications.