Search Results for "open_gapps-arm-7.1-nano-20211008"

Snap7, through three specialized components: Client and the inedited Server and Partner, allows you to definitively integrate your PC based systems into a PLC automation chain. Designed to transfer large amounts of hi-speed data in industrial facilities, it scales easily, down to small Linux Arm boards such as Raspberry PI. Hi level object oriented wrappers are provided, currently C/C++, .NET/Mono, Pascal, LabVIEW, Python with many source code examples. Very easy to use, a full working server example is not bigger than the “Hello world”. Many projects/makefiles are ready to run to easily rebuild Snap7 in any platform without the need of be a C++ guru. ...

VBS script designed to directly enter the frequency of the output signal of the numeric keys '0..9' on the keypad and sending commands to the COM port with voice. The marker button start and end of the input assigned to the key 'Q'. Interaction with the DDS goes through the module Arduino Nano via the serial interface over USB (or Bluetooth or Wi-Fi over UART). Thanks to the module also becomes possible battery life DDS, because saving and restoring settings by using basic chip EEPROM ATMega328P.

DOSIRCd is a complete Internet Relay Chat server, designed to run on a 16-bit DOS-based system. You can now dust off that old 8088 or 286 to turn it into a dedicated IRC server! This project is written in 100% QuickBASIC 7.1 PDS. Incl. built-in NickServ.