Search Results for "/storage/emulated/0/android/data/net.sourceforge.uiq3.fx603p/files" - Page 3

...Source files can be found in src/qt folder.

Encode bitmap(bmp) file with run-length encoding(RLE), just like RLE4 and RLE8, but extend to RLE16, RLE24 and RLE32. Usually, this project will be used in GUI of embedded system, to make the image files smaller, and save the IO bandwith. If the GUI support JPG or PNG, the compression ratio is much better than RLE, but how about the embedded system encounters both caculate limitation and IO bandwidth limitation? Try this project, I hope it can make a banlance between caculation and bandwidth. But first of all, you should know that the compression ratio of RLE is highly depend on the bitmap file data, the ratio can larger than 1, only when the same color continuously repeats in one line, it will gain a smaller compression ratio.

ONE-NET is both an open standard and an implementation of a wireless network protocol. The protocol was originally intended for home automation but has many more applications where low power, secure communications are required.

FreeNFS is a NFS 2.0 and 3.0 Compliant Server for Windows. FreeNFSE is a NFS 2.0 and 3.0 Compliant Server for Windows to a Embedded System Client. Adding more protocols to better serve embedded systems and video streaming. Insure to read the Blog, for current information on whats new!

For automatically installing Windows. You no longer need burn OS disc, interfere installing process, search device drivers online and then install them. Just click a couple of buttons and wait for about 20 minutes, then you get a ready to use Windows

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and implemented in assembler for AVR microcontrollers. ...

WSNFuse provides an abstraction layer for wireless sensor networks, allowing to expose one or many WSNs by means of different access technologies(e.g.: filesystem, JMS, RMI, Smart-Spaces, etc.).Its plugin-based architecture allow users to develop and adopt thei own plugins and configure WSN fuse to better suit their needs. This project has been partially supported by the CHIRON EU research project co-financed by the artemis joint undertaking (http://www.chiron-project.eu/) .

This is a RGB LED Pin-back Button controlled by an AVR Microcontroller.

GXGPRS offers an easy way to send data using GPRS connection. General Packet Radio Service (GPRS) enabled networks offer always-on, high capacity, Internet based content and packet based data services.

Gurux Data Refinery collects data directly from physical device or data stream, processes it, and presents the results, with easy-to-use components. All data is collected and saved with a timestamp, and the data is always time-bound. To release durin

AVRphrase is an electronic game based on Catchphrase by Hasbro. This project includes all of the design files needed to create your own AVRphrase. You can read about the development here: http://zjembedded.blogspot.com/2011/01/avrphrase.html

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

EDID CEA extention block editor, VESA block also can be edited by hex mode.

This is an implementation of the ymodem protocol for serial transfer of data implemented using python.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.

A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.

Simplify build and use of software emulated board, using a configuration textual file.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

The Embedded Data Display System provides a lightweight portable C++ server library and a PC (Windows, Linux, or Mac) based client that captures and graphically displays data generated by embedded devices such as medical or industrial instruments.

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm

With GLCD Tools you can convert windows bitmap files (bmp) to a byte array suitable for graphic LCD displays. Additionally you can create fontsets out of your system fonts for the displays. It outputs C Code which you can use in your µC project.

Converter from DOS-exe (MZ format) files to ROM-able (*.rom format), suitable for loading to absolute addresses. Can be used for create BIOS extenders for I/O card and another soft for x86-based embedded systems for big length files (more, than 64K).

Agaseous-NES is a graphic app for creating integrated circuit layers. Developers can import Agaseous for SuperWikia Alpha .AJA (Agaseous Joint Application) text files to automate & create asauna plates. Also imports and intergrate Adobe .PSD files.

...Given that the controller can accept data from over the network, another embedded controller that is able to use these kinds of cameras can be loaded with this software to send the image and depth data from the kinect over the network to the other controller. Currently, KinectStreamer can only use the libfreenect library as its driver. Support for the OpenNI driver should be rolling out soon.