Search Results for "/storage/emulated/0/android/data/net.sourceforge.uiq3.fx603p/files"

...It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. Gem fonts and true type fonts complement each other perfectly - gem fonts are small and fast, while true type fonts are device and resolution independent so are scalable to any point size at any resolution.

...Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! Changes in v1.2: Avoid using Spectranet RAM page 0 used by the device itself. Thanks to this change this driver can be used with the upcoming driver for networked disk image. This driver can work along with spectran.fid driver exposing other networking capabilities of Spectranet device to the CP/M system.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it.

control cd organizer devices with a plugin-based architecture. Currently supports Dacal DC-300 and KDS CDM-751

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

Omega48 is a virtual printer driver for Microsoft Windows which allows you to convert the document to the graphics formats such as EMF, BMP and non formated text file (UNICODE or ANSI). Omega48 allows to save MS Windows Spool (SPL) and Shadow (SHD) files

The Samsung ML-1210 printer works perfect under Win32, under linux (not so good), but not under Win64. This tool is not a complete driver, even presently not a 64-bit, but it allows to print graphic files. It uses code from ghostscript 5.10 for linux.

Project purpose: emulating a disk drive which information will be stored in a database through network.