Search Results for "c:\program files\micronetics\msmws\program\" - Page 2
Sort By:
Showing 199 open source projects for "c:\program files\micronetics\msmws\program\"
View related business solutions-
EHS Software and Management SystemERA Environmental Software Solutions develops web-based EHS management software for small, medium, and large manufacturers needing to comply with federal, provincial, and state regulations, monitor their air, water, and waste emissions and other environmental outputs, author and manage Safety Data Sheets (SDS) in more than 40 languages, or standardize their Health and Safety procedures for incident and inspection tracking, training delivery, and audit management. The platform also supports comprehensive reporting for programs like TRI, Tier II, Title V, NEI, and NPRI. Companies across the automotive, aerospace, general manufacturing, and paints and coatings industries, to name a few, rely on ERA’s all-in-one, SOC 2 Type II certified SaaS for complete coverage of their EHS needs.
-
Houzz Pro is the #1 business management software for home construction and design professionals.Get an all-in-one solution that spans the full customer lifecycle, including marketing, CRM, estimation & proposal building, project management, a 3D Floor Plan builder, an online invoicing and payment portal, as well as a client portal and collaboration tools. Start a free trial today to see why thousands of Pros run their business on Houzz Pro. Plans available for all business sizes.
-
1
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
HelloWord-Keyboard is a high-end modular keyboard platform where both the hardware and firmware are designed from scratch to provide deep customizability and advanced features. The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting... -
2
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple... -
3
VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.
-
4
usbdmx.com curses console
A curses program to control the usbdmx.com-based DMX adapters.
This is a curses program to control the usbdmx.com-based based DMX adapters. This is my version : http://clx.freeshell.org/usbdmx.html -
The Apple Device Management and Security PlatformAchieve harmony across your Apple device fleet with Kandji's unmatched management and security capabilities.
-
5
WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.
-
6
thinkfan
fan control for control fans
A simple fan control program. Read temperatures, check them against configured limits and switch to appropriate (also pre-configured) fan level. Requires a working thinkpad_acpi or any other hwmon driver that enables temperature reading and fan control from userspace. -
7
NB: Development has been moved to Github: https://github.com/avrdudes/avarice AVaRICE is a program for interfacing the Atmel JTAG ICE to GDB to allow users to debug their embedded AVR target.
-
8
HoloCubic
Multi-function transparent display desktop station
HoloCubic is a multi-function transparent display “desktop station” that uses a dispersive prism to create a pseudo-holographic visual effect, combined with WiFi and Bluetooth connectivity to support interactive network-capable applications. Built around an ESP32 PICO-D4 microcontroller, a 1.3″ 240×240 ST7789 display and MPU6050 inertial sensor, the device allows you to build a “floating hologram” style display module with additional networked visual features like weather display or follower... -
9
Footcontroller
Control your Linux PC with a standard foot pedal
...It uses xdotool to provide you with the ability to assign commands to each pedal. Many foot pedals come with software, often MS Windows only, which allows you to program the pedals to perform some function or other, Footcontroller does away with the proprietary software and allows you to define multiple sets of commands that can be swapped in or out at the click of a button. The advantage is that now, your foot pedal can perform different tasks in multiple situations simply by selecting the appropriate pedal set, rather than having to re-program the foot pedal from scratch. -
Point of Sale. Powerful and Simple.Vibe Retail is an all-in-one retail point-of-sale and operations platform built for single-store and multi-location retailers seeking to unify inventory, sales, staff and customer data from one mobile-friendly interface. The system lets you track inventory across locations and warehouses, handle item variations (size, color, material), manage purchase orders and supplier deliveries, print custom barcodes, and transfer stock between stores in real time. On the sales side, Vibe supports multiple payment types (cards, cash, checks, gift cards, EBT), layaway workflows, serial number tracking, delivery management, loyalty programs and branded receipts. Retailers can integrate with online platforms (such as Shopify and WooCommerce), sync in-store and online sales, access 40+ real-time reports on sales, inventory and performance, set up promotions and discounts, and print receipts from mobile devices.
-
10
footmouse
Allows Linux users to use a HID compatible USB foot pedal as a mouse
...Functions available are Left Click, Double Click, Right Click, Cursor Up, Cursor Down, Cursor Left, Cursor Right, Wheel Scroll Up, Wheel Scroll Down, Middle Click, Page Up, Page Down, Window Select, Close window, Minimise window and Null (define an option that does nothing) - Many foot pedals come with software, often MS Windows only, which allows you to program the pedals to perform some function or other, Footmouse does away with the proprietary software and allows you to assign Mouse commands to a pedal or a pedal with a modifier key. All functions can be assigned as you require. Designed principally to help people who have difficulty operating a Mouse but able to operate a foot pedal. ... -
11
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus all devices Interactive - enter interactive mode File - You can use the executable script to attach files Reset - restart xBridge-M01 You may refer to xBridge that is based on this API https://xbridge-m01.doidx.com You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?... -
12
L-ink_Card
Smart NFC & ink-Display Card
L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink... -
13
Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver. Use it and you should save battery consumption and reduce the temperature of your laptop.
-
14
deej
Set app volumes with real sliders! Arduino project to build hardware
...The sliders are connected to 5 (or as many as you like) analog pins on an Arduino Nano/Uno board. They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file. -
15
papouch-tmu
Utility to read data from Papouch TMU USB thermometer
Papouch is a Prague-based company which produces industrial devices, and (as far as I know) the only thermometer which is able to communicate via USB. Check http://www.papouch.com. This utility can be used to obtain data from the Papouch TMU USB thermometer. The program is started immediately after the thermometer is pluged into the linux computer. The device sends the temperature in simple ASCII format every few seconds. Everytime a value is send, papouch-tmu utility reads the temperature and stores it into file /var/run/papouch-tmu/temperature. Program stops automatically when the thermometer is unplugged. ... -
16
Serial Console (sc)
Minimal terminal program to get access to a serial console
serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine. -
17
KL-G2 Printer Utility
Casio KL-G2 Printing for Linux
This program prints a PBM file using a Casio KL-G2 Label Printer connected via USB on Linux. Also supports manual feed/cut and controls most of the printer options. -
18
Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.
-
19
lm-sensors
lm-sensors repository
lm-sensors is the canonical Linux project for reading motherboard and peripheral hardware sensors—temperatures, fan speeds, voltages—and exposing them to userspace. It ships a probing utility (sensors-detect) that identifies I²C/SMBus chips and kernel drivers, then a runtime tool (sensors) that prints human-readable readings for quick diagnostics. The companion library, libsensors, gives applications a stable API to query sensor values, enabling desktop applets, monitoring daemons, and alerting systems to build on a common foundation. Configuration files map raw chip registers to friendly labels and scaling factors, so outputs reflect real hardware characteristics across many vendors. ... -
20
NoteBook FanControl (NBFC)
Cross-platform fan control service for notebooks
NoteBook FanControl (NBFC) is a cross-platform fan control service for notebooks. It comes with a powerful configuration system, which allows to adjust it to many different notebook models. Currently, there are no pre-built releases for Linux, but you can easily build NBFC yourself. In general the NBFC Wiki is the first place to go if you have any questions. If you want to build NBFC from source, the first thing you have to do is to download the source code. You can easily clone the NBFC... -
21
DIY Arduino Boards IO I2C
DIY Arduino Boards for IO using port expanders and I2C
DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code -
22
GTK PPP
GTK front-end to wvDial, a modem/ISDN dial-up software
GTK PPP is an easy to use graphical dialup connection configuring and dialing tool with system tray icon support. It uses GTK+ for its graphical interface and integrates well in GNOME desktop environment. It also uses WvDial dialer as its backend, providing simple configuration via config files. You can also use plain wvdial if you don't have X running. GTK PPP is GTK3 fork of GNOME PPP. -
23
liblabpro
Open-source access to Vernier LabPro devices
liblabpro is a cross-platform C library for controlling and collecting data from Vernier LabPro devices. It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system. -
24
Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.
-
25
freenas-tempreport
FreeNAS Temperature Report
FreeNAS Temperature Report is a small server program that provides temperature readings for your FreeNAS unit. Install this program in a jail on your FreeNAS, then use your web browser and go to http://jail_ip to see your temperature readings. Installation instructions: http://sourceforge.net/p/freenas-tempreport/wiki/Install/
