Search Results for "sandbox:/mnt/data/project_plan.pod"

The Point Cloud Library (PCL) is a standalone, large scale, open project for 2D/3D image and point cloud processing. PCL is released under the terms of the BSD license, and thus free for commercial and research use. Whether you’ve just discovered PCL or you’re a long time veteran, this page contains links to a set of resources that will help consolidate your knowledge on PCL and 3D processing. An additional Wiki resource for developers is available too. To simplify both usage and...

...It is a simplified version of Corvis [Jones et al.,Tsotsos et al.], designed for pedagogical purposes, and incorporates odometry (relative motion of the sensor platform), local mapping (pose relative to a reference frame of the oldest visible features), and global mapping (pose relative to a global frame, including loop-closure and global re-localization, this feature, present in Corvis, is not yet incorporated in XIVO). XIVO runs at 140FPS on stored data (here from a RealSense D435i sensor) or on live streams with a latency of around 1-7ms, depending on the hardware. It takes as input video frames from a calibrated camera and inertial measurements from an IMU and outputs a sparse point cloud with attribute features and 6 DOF pose of the camera. It performs auto-calibration of the relative pose between the camera and the IMU as well as the time-stamp alignment.

ZPR is a program that produces orthophotos. The method used is to give colors to point-cloud (photo obtained by a digital camera, cloud obtained by a laser scanner) and to project the point-cloud to a requested plane. With this method, the projection pla

...The toolbox was developed in the Computer Vision & Active Perception Lab, at the Royal Institute of Technology, as a participant of the EU research project PACO-PLUS, and published at the project's end in Summer 2010. BADGr provides modules to approximate the shape of a point cloud (possibly from sensor data) by box primitives. These box primitives then serve as a base for the generation of box-based pre-grasp hypotheses for robot grippers.

### mesh reconstruction from point cloud # filters the input data eliminating noise # creates a quad shell - mesh with inside and thickness ### additional info: - GUI using Clan-Lib SDK

Volumetric is a 3-D image processing tool. It reads point cloud data, expands it to a volumetric space with highly effective memory usage, and filter out necessary points.