Search Results for "open_gapps-arm-7.1-nano-20211008"

...It is straightforward, reliable, extensible and adaptable, which is why it is used by many respected commercial 3D printer vendors as well as hobbyists. It runs on inexpensive 8-bit Atmel AVR micro-controllers, with added support for 32-bit and ARM-based boards. Marlin builds can be small enough for use on a headless printer with only modest hardware, and features can be enabled as-needed.

ePnR is a simple Integrated Circuit (IC) block standard cell placement & routing tool. ePnR currently supports only circuit blocks using equal height standard cells arranged in one or more channels of user configurable length. Standard cells are described in a simple text based library (compliant with eLogSim). Placement follows initially the cell call order in the SPICE like circuit input netlist. However, a placement optimization, aiming at minimum weighted accumulated wire length, by...

...This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation differential amplifier and RTC. It can help monitoring arrhythmia syndromes such as bradycardia, tachycardia, extra-systoles, pause or flutter. WARNING: In no case it can be use to replace a professional medical examination. Device MUST NOT BE CONNECTED to appliance powered by mains - risk of electrical shocks ************************************************************************************** see also: ECG Logger Viewer application : https://sourceforge.net/projects/ecg-logger-viewer/

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

BEYE (Binary EYE) is a free, portable, advanced file viewer with built-in editor for binary, hexadecimal and disassembler modes. It contains a highlight AVR/Java/i86-AMD64/ARM-XScale/PPC-64 and other disassembler, full preview of MZ,NE,PE,ELF and other.

CacheMagnet geocaching software lets you edit, map, and download GPX waypoint files to your GPSr or IPod Nano. Maps and reports can be printed to take with you in the field. The map supports zoom and pan, road map, satellite map and birds-eye.

C-library for controlling robotperipherals with a LPC2148 microcontroller. The FreeRTOS OS is used together with a GNU environment for the ARM-architecture.

Belenos is an automated sun reflector for solar concentration. It is a system based on a Raspberry Pi board (ARM Linux board). Two motors allows to pilot the reflector orientation to follow the sun along the day. This system can receive tele-command and send tele-metry on TCP\IP network.