Search Results for "bascom-avr" - Page 3

Compiler and device support for Ada programs on the ultra-low-power TI MSP430 microcontrollers. This project builds on the Gnu Gnat/GCC Ada compiler, the Sourceforge mspgcc back-end and MSP430 CPU support. It was inspired by the Sourceforge AVR-Ada project.

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

Firmware for AVR/ARM target boards based on the Elektor Internet Radio and Atmel's Internet Radio AN. The Radio connects to SHOUTcast/Icecast servers and uses VS10xx chips or the Helix decoder. A HTTP server and simple LCD IF is included.

The GLCD SED1531 Library provides functions to draw pixels, lines, filled- and open rectangles and text for micro-controllers such as the Atmel 8-bit AVR series for (very cheap!) SED1531 controller based graphical LCD's. The library is written with portability to other micro-controllers and compilers in mind; all target specific parts are stored in a separated header file . The included example is for the Atmel ATtiny2313 and AVR-GCC. It is expected that other targets can be supported with minimal effort. ...

Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI.

LeanLoader is a modularized boot loader for tiny embedded systems including 8-Bit AVR or low end ARM7TDMI MCUs. Among others, it supports TFTP over Ethernet as well as XMODEM over RS232.

Professional stored program control. It is optimized for heat control, but you can control whatever you want. It use a FreeRTOS.org-Kernel on an Atmel AT32UC3A1512 and control Triacs over AVR ATtiny2313. The heatcontrol for your heating.

pico]OS is a highly configurable and very fast real time operating system (RTOS). It targets a wide range of architectures, from very small 8 bit processors and microcontrollers up to very huge platforms. Ports are available for ARM, AVR, PPC, MSP430, 6502, MYCPU and for developing and testing purpose also for 8086, Win32 and Unix. pico]OS 1.0.4 was released 2012-07-12. This is a maintenance release that includes some bug fixes for the new ports for MSP430 and ARM Cortex-M. You may also visit Ari's website that contains cool stuff related to pico]OS: http://stonepile.fi/tags/picoos/

...A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and implemented in assembler for AVR microcontrollers. The project is currently at the stage of testing the protocol for bugs and implementing some simple devices which use it.

This is a RGB LED Pin-back Button controlled by an AVR Microcontroller.

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8.

...This can be used with either the left or right hand (or a chorder can be used for each hand, effectively doubling the typing speed). SpiffChorder hardware is based on Atmel AVR ATmega168, using Objective Development's V-USB (a software-only implementation of a low-speed USB device).

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

A project collecting free software modules which can be used together in an arbitrary microcontroller application, starting with AVR platforms.

USB programmer for Atmel AVR controllers with additional direct connection between the running target device and PC for logging and controlling purposes - no need for extra COM port at PC side and UART at AVR-controller side.

AVR-based adapter for accessing Vehicle Area Network bus used by old peugeot cars. Project holds device schematics and AVR MCU C code.

Hardware description and software for the Bob-clock, a digital implementation of an analog clock using 60 bi-color LEDs for displaying the time. The hardware is based on an Atmel AVR ATmega324.

this project purpose is create simple interface between LCD and AVR Device

CAN Remote Automation and Control with the AVR Set of tool for Web based Home Automation over the CAN-Bus including firmware and PCB.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.

Expansion card for 8 bit computer Sharp MZ-800. Connection to SD / MMC card with FAT16 filesystem. Emulated FD controller. MZF repository. This project is already stoped. Please see the MZ800 Unicard 2nd generation https://sourceforge.net/projects/mz800ukp1/

Kmax 8bit microkernel for AVR ATMega MCUs written in assembler (AVRASM & GCC compatible) with a C API. Core features include priority-based preemptive round-robin scheduling, mutexes, fifos and semaphores with a focus on speed and ease of use.

Free general purpose loader tool for ATMEL's AVR controllers using arduino board or FTDI's FT232. PCB Files also available.