Search Results for "signal"

Gwyscope is a low cost, open hardware, Digital Signal Processor (DSP) suitable for Scanning Probe Microscopy measurements, focusing on demonstrating the concept of adaptive scanning, general XYZ data acquisition and statistical data processing on the controller level. More details can be found in: M. Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. ...

...Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. ...

The purpose of this simple DIY project is to build an electronic circuit that received the GPS time signal, convert it to the radio-controlled clock format, and transmit that signal to the clock. Once built, there is no need for setup and maintenance, all you need is put this unit close to the window to receive GPS signal, and it will transmit the time signal to your radio-controlled clock.

...To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

A programmable signal generator and RF synthesizer for scientific experiments, especially quantum computing and quantum information processing. It includes hardware, firmware, software, and documentation, all under an open source license.

Module 1: durchblicker: embedded Logicanalyzer with direct output on VGA-monitor

...The aim of the project is to build a 4Pi array for charged particles, with high granularity and good energy resolution, with A and Z identification capability over the widest possible range. It will use the up-to-date techniques concerning detection, signal processing and data flow, with full digital electronics. Neutron detection is also foreseen via the collaboration with the NEUTROMANIA group. FAZIA is designed to operate at stable and radioactive beams facilities like LNL-Legnaro, LNS-Catania in Italy, GANIL-SPIRAL and SPIRAL2 in France, GSI-FAIR in Germany in the horizon 2010-2015. ...

This project aims to generate video signal using an FPGA development board