com0com v3.0.0.0 signed uploaded

Vyacheslav Frolov — Thu, 13 Jul 2017 07:33:54 -0000

hub4com v2.1.0.0 released

Vyacheslav Frolov — Mon, 18 Jun 2012 10:58:26 -0000

The hub4com is a Windows application and is a part of the com0com project.
The hub4com can be used for sharing, joining, redirecting, multiplexing and encrypting serial and TCP/IP port data.
It allows to receive data and signals from one port, modify and send it to a number of other ports and vice versa.

In this release the following changes were done:

* The pinmap filter: added ability to set pins to ON/OFF.
* The pinmap filter: added --data option to control data stream by pin state.
* Added --reconnect option to com2tcp-rfc2217.bat.
* Implemented serial port share mode to allow use COM port by other applications when port is not used by hub4com.
* Added --share-com-port option to com2tcp-rfc2217.bat.
* The telnet filter: added --ascii-cr-padding option to insert padding following CR in the default ASCII mode.
* The pin2con filter: added --delay-disconnect option to ignore the disconnect if the connect will raised shortly.
* Added --delay-disconnect option to com2tcp-rfc2217.bat.
* Implemented tag-sync filter to allow resynchronization data tagged by tag filter after data lost.
* Added ability to divide incoming TCP sessions (prevent accepting new TCP connection until the connection counter is 0).
* Fixed some bugs and made some improvements.

The hub4com can be downloaded from
http://sourceforge.net/projects/com0com/files/hub4com/

The homepage for com0com project is http://com0com.sourceforge.net/

com0com v3.0.0.0 released

Vyacheslav Frolov — Thu, 14 Jun 2012 14:31:14 -0000

The Null-modem emulator (com0com) is an open source kernel-mode virtual serial
port driver for Windows, available freely under GPL license. It allows you to
create the virtual serial port pairs to interconnect the COM port based
applications. The com0com can be used for testing COM port based applications
and as a front end for the hardware emulators (t38modem for example) or COM
port redirectors (com2tcp and hub4com for example).

In this release the following changes were done:

* Added ability to put the port to the Ports class.
* Added ability to set selections for setup.exe by setting environment variables.
* Installers setupc.exe and setupg.exe marked as "require administrative access" so Turning off UAC is not required now.
* Added tracing of dialogs while setup.
* Improved silent install and uninstall.
* Added cleaning high data bits for less then 8 bit data. For forcing backward compatibility added AllDataBits option.
* Added ability to uninstall package w/o uninstalling devices and driver.
* Added ability to build installer with com0com.cat file.
* Added ability to build installer suitable for both 32-bit and 64-bit systems.
* Implemented setting friendly names.
* Fixed some bugs and made some improvements.

The com0com can be downloaded from
http://sourceforge.net/projects/com0com/files/com0com/

hub4com v2.0.1.0 released

Vyacheslav Frolov — Tue, 10 May 2011 11:34:51 -0000

The hub4com is a Windows application and is a part of the com0com project.
The hub4com can be used for sharing, joining, redirecting, multiplexing
and encrypting serial and TCP/IP port data.
It allows to receive data and signals from one port, modify and send it to
a number of other ports and vice versa.

In this release the following changes were done:

* Implemented priority and reject modifiers for TCP/IP listener.
* Added ability disable writing to the TCP/IP or serial ports.
* Fixed some TCP/IP bugs.
* Added connection counter logic to pinmap filter.
* Made some optimizations and improvements.

The hub4com can be downloaded from
http://sourceforge.net/projects/com0com/files/hub4com/2.0.1.0/

The homepage for com0com project is http://com0com.sourceforge.net/

com0com v2.2.2.0 released

Vyacheslav Frolov — Thu, 17 Dec 2009 11:30:04 -0000

In this release the following changes were done:

* Added --wait option to the Setup Command Prompt.
* Fixed some bugs.

The com0com can be downloaded from
http://sourceforge.net/projects/com0com/files/com0com/

Null-modem emulator (com0com) v2.2.1.0 released

Vyacheslav Frolov — Fri, 29 May 2009 15:26:45 -0000

In this release the following changes were done:

* Added logging COMx names in the COM port database.
* Added ability to get list of names that already in use (busynames command).
* Added ability to speed up installing of multiple com port pairs (--no-update option).
* Improved silent install and uninstall.
* Fixed some bugs and made some improvements.

The com0com can be downloaded from
http://sourceforge.net/project/showfiles.php?group_id=129551&package_id=141993

HUB for communications (hub4com) v2.0.0.0 released

Vyacheslav Frolov — Thu, 12 Mar 2009 13:56:19 -0000

The HUB for communications (hub4com) is a Windows application and is a part
of the com0com project. The hub4com can be used for sharing, joining,
redirecting, multiplexing and encrypting serial and TCP/IP port data.
It allows to receive data and signals from one port, modify and send it to
a number of other ports and vice versa.

In this release the following changes were done:

* Added TCP/IP ports support.
* Implemented all com2tcp functionality.
* Implemented RFC 2217 "Telnet Com Port Control Option" protocol.
* New features can be added by implementing plugins.
* More other features added.

The hub4com can be downloaded from
http://sourceforge.net/project/showfiles.php?group_id=129551&package_id=223131

The homepage for com0com project is http://com0com.sourceforge.net/

Null-modem emulator (com0com) v2.2.0.0 released

Vyacheslav Frolov — Tue, 09 Dec 2008 08:10:53 -0000

In this release the following changes were done:

* Implemented noise emulation.
* Added ability to monitor BREAK state.
* Added ability to fix timeouts for read operations to
compensate the network delays.
* Added ability to do silent uninstalls (uninstall /S).
* Fixed some bugs and made some improvements.

The com0com can be downloaded from
http://sourceforge.net/project/showfiles.php?group_id=129551&package_id=141993

Null-modem emulator (com0com) v2.1.0.0 released

Vyacheslav Frolov — Fri, 06 Jun 2008 09:10:33 -0000

In this release the following changes were done:

* Implemented ability to monitor and get the paired port settings (baud rate,
byte size, parity, stop bits).
* Implemented ability to change state of individual pins (OUT1 and OUT2 for
example).
* Added command to Setup Command Prompt for reloading driver.
* Added ability to wire OUT2 pin.
* Added ability to permanently hide port for port enumerators.
* Fixed some bugs and made some improvements.

The com0com can be downloaded from
http://sourceforge.net/project/showfiles.php?group_id=129551&package_id=141993

HUB for COM ports (hub4com) v1.1.0.0 released

Vyacheslav Frolov — Mon, 17 Mar 2008 10:16:48 -0000

The HUB for COM ports (hub4com) is a Windows application and is a part
of the com0com project.

It allows to send data received from one COM port to a number of COM
ports and vice versa. In conjunction with the com0com driver the hub4com
makes it possible to handle data from a single serial device by a number
of different applications. For example, several applications can share
data from one GPS device.

In this release the following changes were done:

* Added read interval timeout option.
* Added ability to send data received from port to
the same port.
* Fixed some bugs.

The hub4com can be downloaded from
http://sourceforge.net/project/showfiles.php?group_id=129551&package_id=223131

The homepage for com0com project is http://com0com.sourceforge.net/

Recent posts to news

com0com v3.0.0.0 signed uploaded

hub4com v2.1.0.0 released

com0com v3.0.0.0 released

hub4com v2.0.1.0 released

com0com v2.2.2.0 released

Null-modem emulator (com0com) v2.2.1.0 released

HUB for communications (hub4com) v2.0.0.0 released

Null-modem emulator (com0com) v2.2.0.0 released

Null-modem emulator (com0com) v2.1.0.0 released

HUB for COM ports (hub4com) v1.1.0.0 released