Activity for Cindy components for Delphi 7 and newer

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 28 Oct 2024 08:45:25 -0000

Hi, i understand your need but i can't work in this for next weeks. "By the way, which functions make the tabs and sheets?" The component herits from TPageControl, so, it is not my component that do that. Regards,

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 28 Oct 2024 08:42:16 -0000

Hi, good ^^

Reza Pajhouhesh posted a comment on discussion Open Discussion

Reza Pajhouhesh — Thu, 24 Oct 2024 08:25:15 -0000

Hi, In RTL languages like Persian and Arabic, it is better and more logical to arrange the component tabs and sheets from the right to the left direction, as in the figure below, changes must be made in the source component (necessary functions to change, adding new functions, etc.) By the way, which functions make the tabs and sheets?

José Marcelino Menezes posted a comment on discussion Open Discussion

José Marcelino Menezes — Wed, 23 Oct 2024 18:27:23 -0000

Resolved. I had installed two versions of Delphi, Seatle and Alexandria. I uninstalled Alexandria and it worked. Thanks.

José Marcelino Menezes modified a comment on discussion Open Discussion

José Marcelino Menezes — Wed, 23 Oct 2024 13:49:39 -0000

Hello friend, could you help me with this problem? "Registration procedure, Cyregister.Register in package C:\Users\Public\Documents\Embarcadero\Studio\17.0\Bpl\dpkCindyPackD10.bpl raised exception class EAccessViolation: Access violation at address 5005FC08 in module 'rlt230.bpl' Read of address FFFFFFD0" I am using Delphi Seatle 10.0 and run as administrator This is the path of the package: C:\Program Files (x86)\Embarcadero\Componentes Delphi\cyComponents.v.8.24.D2009-XE10.2\VCLPack\dpkCindyPackD10.dproj...

José Marcelino Menezes posted a comment on discussion Open Discussion

José Marcelino Menezes — Wed, 23 Oct 2024 13:36:45 -0000

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 22 May 2024 07:47:57 -0000

Hi, i use Delphi 10.2 and it works perfectly. Maybe something change since version 6. Try change ResizeMode and ResizeSide property values. You can also compile TcySplitter demo in order to check if it works. Regards,

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 22 May 2024 07:45:00 -0000

Greetings, I am using the cySplitter in internal software. I upgraded the software to 10.4 And it does work anymore. The cySplitter does not expand the TCategoryPanel the same code works in xe7. The component was changed from version 6 to 8 to (i used version 6 and as i upgraded to 10.4 i upgraded to 8) 6: TcySplitter = class(TGraphicControl) 8: TcySplitter = class(TCustomControl) and you added in the constructor ControlStyle := ControlStyle + [csAcceptsControls]; i could not resolve the issue. Do...

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 24 Jan 2024 14:08:08 -0000

I deleted the package "dsnap" and some other that I can't remeber now. Anyway, each time I met problem with a package was enough to delete it and re-adding

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 22 Jan 2024 08:36:06 -0000

I, can you specify the package that you have deleted?

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 22 Jan 2024 08:34:59 -0000

Hi Mauricio. Finally I found the solution! I deleted from group "requires" the package that was obstructing the compilation and then the building process asked to add it again but this time without error. So I managed to install your components to Delphi 12 using the packages for D10. Thanks for your help and your great job

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 16 Jan 2024 09:48:55 -0000

Can you post here your email address please? I will reject the post in order to not appear here but i will be able to send you an email in order to contact you.

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 16 Jan 2024 09:47:33 -0000

Can you post here your email address please? I will reject the post in order to not appear here but i will be able to send you email in order to contact you in order to check what is going wrong.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 16 Jan 2024 09:45:19 -0000

Happy new year Mauricio As I wrote in my previous message (2023-12-29) is impossible to install pkCindyDBCoreD11.dpk although I have build pkCindyCoreD11 and I have add the core directory to the library paths. This happens only at Delphi 12 installation. At Delphi 11.3 and Delphi 2007 the installation has no problems. Any suggestion please ?

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 16 Jan 2024 09:45:18 -0000

hi do you have a solution I have same problem

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 10 Jan 2024 12:54:48 -0000

I can't test all delphi versions. Can you specify the error encountered?

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 10 Jan 2024 12:53:13 -0000

Cannot be used in Delphi 2007 environment, compilation does not pass

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 02 Jan 2024 08:40:54 -0000

Hi, don't know why you have an error from dsnap package. Try this: https://docwiki.embarcadero.com/RADStudio/Alexandria/en/E2225_Never-build_package_%27%25s%27_must_be_recompiled_(Delphi) Concerning "Required package 'pkCindyCoreD11' not found", is seems that you don't have compiled this package in 32 BIT or 64 BIT. Mauricio

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 02 Jan 2024 08:33:39 -0000

Thanks Mauricio I installed dpkCindySystemD11.dpk, pkCindyCoreD11.dpk and I the "cyComponents\Core" directory to the library paths but when I Try to build pkCindyDBCoreD11.dpk I receive the error : [dcc32 Fatal Error] pkCindyCoreD11.dpk(30): E2225 Never-build package 'dsnap' must be recompiled [dcc32 Fatal Error] pkCindyDBCoreD11.dpk(35): E2202 Required package 'pkCindyCoreD11' not found. What I'm missing, please ?

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 29 Dec 2023 09:26:12 -0000

Hi, normally, Cindy already support all future versions ! You will not find dpkCindySystemD12.dpk but ... if you dont have Delphi XE 10 installed, you can use dpkCindySystemD10.dpk The other wanted packages to use may be named like D10.dpk or ... if you dont have Delphi XE 11 installed, you can use dpkCindySystemD11.dpk The other wanted packages to use may be named like D11.dpk I may create *D12.dpk files in next release but you can use this solution.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 29 Dec 2023 09:14:46 -0000

Hi Mauricio Are you planning to release a version with Delphi12 support?

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 20 Dec 2023 16:19:25 -0000

Thanks again and congratulations for your excellent work. It worked now.

Cindy components for Delphi 7 and newer released /tcycomponents/cyComponents 8.30.03.zip

Cindy components for Delphi 7 and newer — Wed, 20 Dec 2023 09:42:02 -0000

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 20 Dec 2023 09:14:47 -0000

I will change my install note that is not clear on it.

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 20 Dec 2023 09:07:13 -0000

Hi, you need to compile pkCindy packages in 32 bits platform in order to install design time packages (dpkCindy). 64 bits platform is optional and only needed for application 64 bits compilation. That's why you can't install dpkCindyPackXXX.dpk for Windows 32 bit platform. Resuming: Compile pkCindy packages in 32 bits and optionally 64 bits . Compile and install dpkCindy packages (design time packages, for Delphi IDE display cindy components) only in 32 bits.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 20 Dec 2023 09:02:39 -0000

Thanks for your reply and your shared work. Thanks for your reply and your work together. I follow this procedure exactly (found in Install.rtf ): Unzip downloaded file into the directory of your choice. Install (required) "Cindy System" package before installing other Cindy packages below! Open, build and install designtime package cyComponents\System\dpkCindySystemXXX.dpk for Windows 32 bit platform Install (required) "Cindy Core" package before installing other Cindy packages below! Open and build...

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 19 Dec 2023 16:32:56 -0000

Hi, only runtime packages (pkCindy.dpk) must be built for Windows 64 bit platform development. dpkCindy is only to have design time components on your Delphi IDE and is not needed for 64 bit compilation.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 19 Dec 2023 16:25:01 -0000

I want install Cindy components only for win64. I'm following the instructions but I receive the error : [dcc32 Fatal Error] pkCindyPackD11.dpk(30): E2225 Never-build package 'rtl' must be recompiled [dcc32 Fatal Error] dpkCindyPackD11.dpk(36): E2202 Required package 'pkCindyPackD11' not found although I have successfully build pkCindyPackD11. Please give me a help. Thanks in advance

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 24 Nov 2023 13:31:14 -0000

You can post here your email address please? I will reject the post in order tonot appear here but i will be able to send you email in order to contact you.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 24 Nov 2023 13:29:08 -0000

i have also the same problems and you can get access to my Delphi 7 system.

Maurício posted a comment on discussion Open Discussion

Maurício — Thu, 23 Nov 2023 14:54:17 -0000

Hi, i can't test compilation because i don't have Delphi 7 anymore. I can help you with remote access if you are interested.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Thu, 23 Nov 2023 09:11:24 -0000

Sir, My system is Delphi 7 Windows 7 sp1. My system is so old and an atom pc. May you please try your code on a delphi 7 system. thank you for everything here the error codes. i changed end if block and else removed library call SysUtils.fs.DecimalSeparator := FormatSettings.DecimalSeparator; // 2018-12-07 We need to put something else fs.DecimalSeparator = #0 and converting '1' will return 1.5 !!! [Hint] cyStrUtils.pas(861): Value assigned to 'WasA' never used [Hint] cyStrUtils.pas(845): Value assigned...

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 17 Nov 2023 09:03:50 -0000

Corrected cyCompilerDefines.inc file, thanks. You can change easily $ENDIF by $IFEND like said by the compiler. For cyStrUtils.pas errors, i can't help you because i don't have Delphi 2007. Can you send me your email in order to contact you? We can make a TeamViewer in order to help you install components.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 17 Nov 2023 08:49:58 -0000

[Error] cyCompilerDefines.inc(582): $IFEND expected but $ENDIF found [Error] cyCompilerDefines.inc(585): $IFEND expected but $ENDIF found [Error] cyStrUtils.pas(1128): Undeclared identifier: 'FormatSettings' [Error] cyStrUtils.pas(1128): Missing operator or semicolon [Error] cyStrUtils.pas(1128): Statement expected, but expression of type 'Char' found String_SubstFast('/', FormatSettings.DateSeparator, Str); [Error] cyStrUtils.pas(3859): Not enough actual parameters [Warning] cyStrUtils.pas(3870):...

Maurício posted a comment on discussion Open Discussion

Maurício — Thu, 16 Nov 2023 12:58:47 -0000

Hi, version 8.30.02 uploaded with unit correction. You can download it right now.

Cindy components for Delphi 7 and newer released /tcycomponents/cyComponents 8.30.02.zip

Cindy components for Delphi 7 and newer — Thu, 16 Nov 2023 12:57:02 -0000

Maurício posted a comment on discussion Open Discussion

Maurício — Thu, 16 Nov 2023 12:49:15 -0000

Hi, try replace System.SysUtils by SysUtils Mauricio

Anonymous posted a comment on discussion Open Discussion

Anonymous — Thu, 16 Nov 2023 12:44:38 -0000

SAME ERROR PLEASE HELP

Leandro Gomes posted a comment on a blog post

Leandro Gomes — Sat, 26 Aug 2023 11:43:53 -0000

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 07 Aug 2023 07:42:11 -0000

Thank you

Cindy components for Delphi 7 and newer released /tcycomponents/cyComponents 8.30.01.zip

Cindy components for Delphi 7 and newer — Thu, 03 Aug 2023 07:49:02 -0000

Maurício posted a comment on discussion Open Discussion

Maurício — Thu, 03 Aug 2023 07:46:35 -0000

vcl.cyWinTypes was replaced by vcl.cyTypes. You can remove the declaration. I will make new version soon.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Thu, 03 Aug 2023 07:34:54 -0000

When I try to complie the VCL Pack units, I get this error; [dcc32 Fatal Error] cyBasePanel.pas(50): F2613 Unit 'vcl.cyWinTypes' not found. Any thoughts? D11.3

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 01 Aug 2023 07:43:17 -0000

Hi, thanks for your solution: i have also modified to cardinal.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 01 Aug 2023 07:37:20 -0000

Hello, With the new D11 VCL.cyWinUtils I get an error when compiling. E2026 Constant expression expected. on lines 109,112,558,594. Any thoughts?

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 01 Aug 2023 07:37:19 -0000

OK - fixed that issue - change the Integer to Cardinal in each instance- now compiles OK

Maurício created a blog post

Maurício — Fri, 30 Jun 2023 14:22:26 -0000

Cindy components V8.30.0 released with Alexandria (Delphi 11) support!

Cindy components for Delphi 7 and newer released /tcycomponents/cyComponents 8.30.00.zip

Cindy components for Delphi 7 and newer — Fri, 30 Jun 2023 14:20:02 -0000

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 30 Jun 2023 14:18:16 -0000

Cindy v8.30.00 coming today ! Delphi 11 support (Alexandria) ^^

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 30 Jun 2023 07:57:31 -0000

Hello I appreciate your efforts may I ask when will Delphi 11 project files be ready?

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 29 May 2023 13:29:07 -0000

hello everyone, may I ask about the Delphi 11 project files? is

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 17 Apr 2023 16:20:57 -0000

Boas, tem sim: TcyPanel mas todos os paneis permitem isso. pode descarregar a demo par testar, é só activar no botão a opção de mover/redimensionar.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 17 Apr 2023 16:18:58 -0000

Bom dia pessoal, Vocês sabem dizer se nessa suite de componentes tem algum panel que possa ser movido e aumentado em tempo de execução ?

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 23 Jan 2023 08:57:52 -0000

Are you sure you are doing correctly? Required package is same as you are trying to compile.

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 23 Jan 2023 08:55:44 -0000

Thanks

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 23 Jan 2023 08:53:31 -0000

I think I have managed to, although I did have to replace a reference to Windows.INFINITE with a 0 in some functions. Changed the files to suit package version 280 rather than 270. compiled and installed OK.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 23 Jan 2023 08:53:29 -0000

HI, When compiling pkCindyPackD10.dpk and I get multiple errors: [dcc32 Fatal Error] pkCindyPackD10.dpk(30): E2225 Never-build package 'rtl' must be recompiled [dcc32 Fatal Error] dpkCindyPackD10.dpk(36): E2202 Required package 'pkCindyPackD10' not found Regards, Calvin PS About to try cindy in RAD 10.4 (Sydney)!

jongwoo Shin posted a comment on a blog post

jongwoo Shin — Thu, 15 Dec 2022 23:48:11 -0000

델파이 11용 ㄱ개발부탁드립니다.제발요

Anonymous posted a comment on discussion Open Discussion

Anonymous — Thu, 03 Nov 2022 08:34:27 -0000

Hi, How could I get that version, and am happy to try it out if it would help you? Thanks

Maurício posted a comment on discussion Open Discussion

Maurício — Thu, 03 Nov 2022 08:34:04 -0000

I will try to create Delphi 11 project files soon.

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 26 Oct 2022 08:31:44 -0000

My current version (not from here) may not be a problem installing in Alexandria and future versions.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 26 Oct 2022 08:29:31 -0000

HI,Is there any progress on porting for ALexandria?

Maurício created a blog post

Maurício — Fri, 14 Oct 2022 12:45:33 -0000

Cindy components NEWS

Anonymous posted a comment on discussion Open Discussion

Anonymous — Thu, 07 Apr 2022 14:39:17 -0000

good

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 08 Jun 2021 09:03:21 -0000

Hi, you are doing nothing wrong, it seems a bug, of the ported Cindy components to Lazarus? By the way, i'm not the developer of the ported version.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 08 Jun 2021 09:00:40 -0000

Working with Lazarus 2.0.12 I dropped a TcySimpleGauge on a TTabSheet of a standard TPageControl. as a result all other Tabsheets are no longer visible. Is this a bug or do I do something wrong ?

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 29 Mar 2021 07:35:27 -0000

Bob Davidson modified a comment on discussion Open Discussion

Bob Davidson — Fri, 26 Mar 2021 07:21:47 -0000

Installing CindyComponents in Delphi 10.4.X: in VCL.cyWinUtils.pas to replace '_Printer_info_2' with '_Printer_info_2w' That's all. This and all other packages are compiled and installed successfully. Of the examples I checked only cyResizer. Everything works P.S. I would like to take this opportunity to thank Mauricio for his excellent work

Bob Davidson modified a comment on discussion Open Discussion

Bob Davidson — Fri, 26 Mar 2021 07:16:38 -0000

Bob Davidson posted a comment on discussion Open Discussion

Bob Davidson — Fri, 26 Mar 2021 07:12:28 -0000

Installing CindyComponents in Delphi 10.4.X: in VCL.cyWinUtils.pas to replace '_Printer_info_2' with '_Printer_info_2w' That's all. This and all other packages are compiled and installed. Of the examples I checked only cyResizer. Everything works

Bob Davidson posted a comment on discussion Open Discussion

Bob Davidson — Tue, 23 Mar 2021 08:47:40 -0000

I don't mind :-) 22.03.2021 16:14, "Maurício" пишет: Maybe i can contact you by mail and we could compile together on your computer. Cindy Core - VCL.cyWinUtils - _Printer_Info_2 - undeclared identifier https://sourceforge.net/p/tcycomponents/discussion/935844/thread/6eeb299fb9/?limit=25#63d9 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/tcycomponents/discussion/935844/ https://sourceforge.net/p/tcycomponents/discussion/935844/ To unsubscribe from further messages,...

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 22 Mar 2021 14:14:46 -0000

Maybe i can contact you by mail and we could compile together on your computer.

Bob Davidson posted a comment on discussion Open Discussion

Bob Davidson — Sat, 20 Mar 2021 20:22:39 -0000

"...Hi, i'm stuck on TOKYO version for now, i can't test compile for myself..." :-(

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 27 Nov 2020 08:34:16 -0000

Hi, i'm stuck on TOKYO version for now, i can't test compile for myself.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 27 Nov 2020 08:32:57 -0000

Greetings, I suspect, but have not yet checked, that it may be because no rpinter is installed - it's actually running ona VM. Will keep you updated on my progress.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 27 Nov 2020 08:32:54 -0000

Hi, I have just got a printer installed and running. Problem occurs in vcl.cyWinUtils, line 849. Hope this helps......

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 27 Nov 2020 08:32:52 -0000

Sorry, I will repeat the error message for you: "E2003 Undeclared identifier: '_Printer_Info_2"

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 27 Nov 2020 08:32:50 -0000

Delphi 10.4 (Sydney) [dcc32 Error] VCL.cyWinUtils.pas(850): E2003 Undeclared identifier: '_Printer_Info_2' [dcc32 Fatal Error] pkCindyCoreD10.4.dpk(48): F2063 Could not compile used unit 'VCL.cyWinUtils.pas'

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 09 Sep 2020 09:04:06 -0000

Hi, i don't see the error but must be an incompatibility with SYDNEY.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 09 Sep 2020 09:02:36 -0000

I keep getting this error when trying to compile pkCindyCoreD10.dproj. It works fine in Delphi 10.3(Rio), but errors in 10.4(Sydney) Any thoughts?

Maurício posted a comment on discussion Open Discussion

Maurício — Wed, 15 Apr 2020 07:54:11 -0000

Hi, seems to be aliases problem (check unit in uses section). Regards,

Anonymous posted a comment on discussion Open Discussion

Anonymous — Wed, 15 Apr 2020 07:52:06 -0000

HI, When compiling cyDB.pas I get multiple errors: [Error] cyDB.pas(700): Undeclared identifier: 'ftLongWord' [Error] cyDB.pas(700): Undeclared identifier: 'ftShortint' [Error] cyDB.pas(700): Undeclared identifier: 'ftByte' [Error] cyDB.pas(703): Undeclared identifier: 'ftExtended' [Error] cyDB.pas(865): Undeclared identifier: 'TDate' [Error] cyDB.pas(865): Previous declaration of 'FieldDate_PartialSetText' was not marked with the 'overload' directive [Error] cyDB.pas(873): Undeclared identifier:...

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 28 Feb 2020 15:08:03 -0000

Hi, i don' t think the problem is from Cindy component. I don' t have 10.3 in order to test. Actually i have 10.2 version (Tokyo). Try compile and run demo projects to check if you have an error ... Regards, Mauricio

Maurício posted a comment on discussion Open Discussion

Maurício — Fri, 28 Feb 2020 15:08:00 -0000

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 28 Feb 2020 15:05:21 -0000

Can you please suggest a solution for the following runtime error: exec. date/time : 2020-02-18 16:29 version : 4.40.60.72 compiled with : Delphi 10.3 Rio madExcept version : 5.0.0 callstack crc : $c2b3a2ee, $471f9e12, $471f9e12 count : 2 exception number : 1 exception class : EAccessViolation exception message : Access violation at address 008DE157 in module 'FileC4Us.exe'. Read of address 137A0FE0. main thread ($466c): 008de157 +01f FileC4Us.exe cyDBAdvGrid 1052 +7 TcyCustomDBAdvGrid.Notification...

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 28 Feb 2020 15:05:16 -0000

Is there a way to fix this issue. I have the latest Cindy release installed. compiled with : Delphi 10.3 Rio madExcept version : 5.0.0 callstack crc : $c2b3a2ee, $471f9e12, $471f9e12 count : 2 exception number : 1 exception class : EAccessViolation exception message : Access violation at address 008DE157 in module 'FileC4Us.exe'. Read of address 13750FE0. main thread ($2848): 008de157 +01f FileC4Us.exe cyDBAdvGrid 1052 +7 TcyCustomDBAdvGrid.Notification 004f4de1 +01d FileC4Us.exe System.Classes TComponent.RemoveComponent...

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 28 Oct 2019 10:30:56 -0000

I have the same problem on Delphi 2007 installed on Windows 10 64 bits platform. the System package is installed OK but when I try to build the Core package it shows 7 errors : [DCC Error] cyStrUtils.pas(896): E2003 Undeclared identifier: 'SysUtils' [DCC Error] cyStrUtils.pas(896): E2066 Missing operator or semicolon [DCC Error] cyStrUtils.pas(896): E2014 Statement expected, but expression of type 'Char' found [DCC Error] cyStrUtils.pas(3018): E2003 Undeclared identifier: 'FormatSettings' [DCC Error]...

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 12 Aug 2019 07:47:02 -0000

Hi, just call cyResizer1.Refresh at the end Mauricio

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 12 Aug 2019 07:41:13 -0000

Anonymous posted a comment on discussion Open Discussion

Anonymous — Mon, 12 Aug 2019 07:40:45 -0000

Hi, How to use the SendToBack and BringToFront functions. for i := cyResizer1.HandlingControlList.Count -1 downto 0 do begin cyResizer1.HandlingControlList.Items[i].Control.BringToFront; //<-- problem end; or for i := cyResizer1.HandlingControlList.Count -1 downto 0 do begin cyResizer1.HandlingControlList.Items[i].Control.SendToBack; end; Thanks.

Anonymous posted a comment on discussion Open Discussion

Anonymous — Fri, 02 Aug 2019 08:28:26 -0000

perfect, that worked ! Thank you

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 30 Jul 2019 09:46:03 -0000

Maurício posted a comment on discussion Open Discussion

Maurício — Tue, 30 Jul 2019 09:22:52 -0000

Hi, just switch Flat property to true. Also, switch Transparent to false. Mauricio

Anonymous posted a comment on discussion Open Discussion

Anonymous — Tue, 30 Jul 2019 09:21:49 -0000

Hi all, how can I remove ALL borders from cyAdvSpeedButtons so I get completly flat buttons ? I already tried to remove all Bevels and also changed the Bevel Settings (draw False, Style none, Width 0 etc.) but I still get these ugly borders as in the left column of the attached picture. It should look like the ones in the right column - these are cySpeedButtons, but here I can not control the layout for ButtonNormal, ButtonHot etc.

David Boltman modified a comment on discussion Open Discussion

David Boltman — Thu, 18 Jul 2019 11:19:13 -0000

As you said, add uses System.Generics.Collections; to cyBaseMeasure.pas. But also to cySkinArea.pas (both in the implementation section)

David Boltman posted a comment on discussion Open Discussion

David Boltman — Thu, 18 Jul 2019 11:18:47 -0000

As you said, add usesSystem.Generics.Collections; to cyBaseMeasure.pas. But also to cySkinArea.pas (both in the implementation section)

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 01 Jul 2019 09:30:49 -0000

"It seems that it's not possible de move a component with an alignment" Of course, you have to deactivate it before. Use component events for that.

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 01 Jul 2019 09:30:05 -0000

Hi, can change color that what you change / added for option 2 and what you try to do?

Maurício posted a comment on discussion Open Discussion

Maurício — Mon, 01 Jul 2019 09:30:05 -0000

Hi, can change color that what you change / added for option 2 and what you try to do?

Maurício modified a comment on discussion Open Discussion

Maurício — Mon, 01 Jul 2019 09:29:28 -0000

Hi, can you change color that what you change / added for option 2 and what you try to do?