Search Results for "jeti ex"

Beta Version !!! Connect your Teensy 3.x, AtMega 32U4 or ESP32 to your Jeti Duplex Receiver Receive rc channel data and send telemetry sensor data. Refer to Jeti EX Bus documentation for wiring http://www.jetimodel.com/en/show-file/642/ Find this project also on github: https://github.com/Sepp62/JetiExBus

Implementation for sending telemetry data via the "EX" protocol for "Jeti Duplex" RC-systems. Enables sensor developers to transfer sensor data to Jeti telemetry when using an Arduino Mini Pro 328, Nano, Leonardo/Pro Micro or a Teensy 3.x. The interface is optimized for simple and self explaining usage. Arduino: Connect Pin 0 (TX0) to the "Ext" input of your Jeti Duplex receiver.

THIS PROJECT IS STILL BETA ! Decoder to process JETI EX telemetry data with Arduino. Connect your JETI Transmitter via "PPM Out"-connector to the RX-Pin of your Arduino board. Select "EX data stream" as data format on PPM-Out-Pin (Menu "Configuration/PPM con. settings") Current sample Sketch uses Serial-Output, so use it on "Micro Pro", "Leonardo " oder "Teensy", since these boards have multiple serial Interfaces.

...The display content of the electronic data terminal output is captured and parsed. Tested with Orbit AECU T17 Should also work with Jakadowsky Pro ECU (untested) There is an example included which delivers a ready to use implementation with Jeti Duplex EX telemetry. Run this code on an Arduino Mini Pro 328 board and Teensy 3.x. Use the projects and libraries on Arduino IDE 1.6 or later. You will need these additional libraries: https://sourceforge.net/projects/jetiexsensorcpplib/ For ATMega 328: https://www.pjrc.com/teensy/td_libs_AltSoftSerial.html