Open Source C Scientific/Engineering Software - Page 4

Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader.

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

Sparse is a direct method solver for the large sparse matrices that are associated with electrical circuit simulation. It uses LU factorization and handles both real and complex square matrices.It is intended to solve many matrices with the same structure

Libnodave is a library that provides the necessary functions to connect to and exchange data with Siemens S7 300/400 PLCs (200 family and S5 family now also supported). Can now also be used under Win32.

This emulator is capable of providing a faithful replication of the HP48. It also has a debugger for the saturn processor.

Agena is an easy-to-learn procedural programming language designed for science, scripting, and many other applications. Binaries are available for Windows, Linux, Solaris, OS/2, Mac OS X, Raspberry Pi and DOS.

gpsim is an open sourced simulator for Microchip's PIC microcontrollers. It supports all three families of PICs: 12-bit, 14-bit, and 16-bit cores. See also gputils http://gputils.sourceforge.net/

The Linux GPIB Package is a support package for GPIB (IEEE 488.2) hardware. The package contains a development environment consisting of a GPIB library written in C, kernel driver modules, and bindings for several other languages.

Modular, touch screen friendly navigation system with GPS tracking, realtime routing engine and support for various vector map formats. Works on a wide range of devices, from computers to smartphones.

ATLAS (Automatically Tuned Linear Algebra Software) provides highly optimized Linear Algebra kernels for arbitrary cache-based architectures. ATLAS provides ANSI C and Fortran77 interfaces for the entire BLAS API, and a small portion of the LAPACK AP

Curve fitting | Data analysis | Plotting | Matrix operations | FFT | Extensible framework | Multiple file formats | Programmable | Open source | Free for everyone NumeRe: Framework for Numerical Computation is a numerical framework written for Microsoft Windows(R) and released under the GNU GPL v3 for solving and visualizing mathematical and physical problems numerically. Keep simple things simple: You want to plot a sine function? Just enter 'plot sin(x)'. You want to load some data? Enter 'load "path/to/your/file"' or drag the file into the terminal. You need to fit a function to the data? Enter 'fit data() -with=YOURFUNCTION(x)' Need assistance? Enter 'help topic' into the terminal or simply press [F1]. Find us on Discord: https://discord.gg/s5tSjwU Follow us on Mastodon: https://fosstodon.org/@numeredevs Visit our page: https://www.numere.org Buy us a coffee: https://ko-fi.com/numere We've moved to GitHub: https://github.com/numere-org

The Systems Biology Markup Language (SBML) is an XML-based description language for representing computational models in systems biology. Visit the project web site to learn more.

CodonW is a programme designed to simplify the Multivariate analysis (correspondence analysis) of codon and amino acid usage. It was written in ANSI compliant C. See the README file for more information.

Judy is a general purpose dynamic array implemented as a C callable library. Judy's speed and memory usage are typically better than other data storage models and improves with very large data sets.

The FFT library to "Keep It Simple, Stupid" This is the original home of kissfft. Most recent development is at https://github.com/mborgerding/kissfft Please ask questions on stackoverflow.com

The C-Munipack is an astrophotometry software package, which offers a complete solution for reduction of images carried out by CCD or DSLR camera, intended on a observation of variable stars, exoplanets and minor Solar System bodies. It provides a simple and intuitive graphical user interface.

Open source SCADA running on Windows and Linux/WINE. Development environment ANSI C/C++98. HMI is based on Qt library. Different technologies (EiC, GigaBASE, FastDB, ORTE) have been integrated. Supported drivers: OPC DA 2.05a, AE 1.10, HDA 1.20, XML DA 1.0, OPC UA 1.03, DNP 3.0, Modbus TCP/RTU, MQTT 3.1.1/Sparkplug B, IEC 60870-5-101/103/104, IEC 62056 DLMS/COSEM, IEC 61850, M-BUS, SNMP, Ethernet/IP, FINS/TCP.

System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.

The netCDF Operators, or NCO, are a suite of file operators which facilitate manipulation and analysis of self-describing data stored in the (freely available) netCDF and HDF formats. Volunteers welcome! See homepage for details and download links.

GTS provides a set of useful functions to deal with 3D surfaces meshed with interconnected triangles including collision detection, multiresolution models, constrained Delaunay triangulations and robust set operations (union, intersection, differences).

An nopensource runoff, erosion and flood model openLISEM. There are two branches: - the classic openLISEM that you can find here: https://github.com/vjetten/openlisem/, please contact Victor Jetten (v.g.jetten@utwente.nl) for details. - the multihazard version of LISEM on this page, for details contact Bastian van den Bout (b.vandenbout@utwente.nl). This software is made available under the licence GPL v3.

Model-based Analysis of Genome-wide CRISPR-Cas9 Knockout (MAGeCK) is a computational tool to identify important genes from the recent genome-scale CRISPR-Cas9 knockout screens technology. For instructions and documentations, please refer to the wiki page. MAGeCK is developed by Wei Li and Han Xu from Dr. Xiaole Shirley Liu's lab at Dana-Farber Cancer Institute/Harvard School of Public Health, and is maintained by Wei Li lab at Children's National Medical Center. We thank the support from Claudia Adams Barr Program in Innovative Basic Cancer Research and NIH/NHGRI to develop MAGeCK.

Provide shared libraries to interface Pascal program with standard astronomy libraries. libpasgetdss.so : Interface with GetDSS to work with DSS images. libpasplan404.so: Interface with Plan404 to compute planets position. libpaswcs.so : Interface with libwcs to work with FITS WCS. This libraries are used with the following projects: https://sourceforge.net/projects/skychart/ https://sourceforge.net/projects/ccdciel/ https://sourceforge.net/projects/virtualplanet/ https://sourceforge.net/projects/virtualmoon/

RPy is a very simple, yet robust, Python interface to the R Programming Language. It can manage all kinds of R objects and can execute arbitrary R functions (including the graphic functions).

MARIE is a robotic development and integration environment focused on software reusability and exploitation of already available APIs and middlewares used in robotics. Its main purpose is to create a rapid-prototyping approach to robotics developments.